13
Response
: +BAUD=Param
Description
: Module
’
s baudrate will be changed immediately after received this command
5.3.6
Read/Write TX Power
Format
: AT+TXPOWER{=Param}
Param: TX power (0~11, default:8)
Response
: +TXPOWER=Param
Description
: If there is a parameter behind the command, the TX power is written, if not,
read the TX power.
AT+TXPOWER=0 Correspond to: -19.5dbm
AT+TXPOWER=1 Correspond to: -13.5dbm
AT+TXPOWER=2 Correspond to: -10.5dbm
AT+TXPOWER=3 Correspond to: -7.0dbm
AT+TXPOWER=4 Correspond to: -5.0dbm
AT+TXPOWER=5 Correspond to: -3.5dbm
AT+TXPOWER=6 Correspond to: -2.0dbm
AT+TXPOWER=7 Correspond to: -1.0dbm
AT+TXPOWER=8 Correspond to: 0dbm
AT+TXPOWER=9 Correspond to: 1.0dbm
AT+TXPOWER=A Correspond to: 1.5dbm
AT+TXPOWER=B Correspond to: 2.5dbm
Example
: Read currently TX power
<<
AT+TXPOWER
>>
+TXPOWER=8
>>
OK
Example:
Setting currently TX power
<<
AT+TXPOWER=11
>>
OK
5.3.7
Turn On/Off Low Power Mode
Format
: AT+LPM{=Param}
Param: Low Power Mode (0/1, default: 0)
Summary of Contents for FSC-BT691
Page 1: ...1 BT5 1 Programming User Guide Version 4 0...
Page 8: ...8...
