MTBDWT memory map (continued)
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
F000_1FF4 Component ID Register (MTBDWT_COMPID1)
32
R
F000_1FF8 Component ID Register (MTBDWT_COMPID2)
32
R
F000_1FFC Component ID Register (MTBDWT_COMPID3)
32
R
18.3.2.1 MTB DWT Control Register (MTBDWT_CTRL)
The MTBDWT_CTRL register provides read-only information on the watchpoint
configuration for the MTB_DWT.
Address: F000_1000h base + 0h offset = F000_1000h
Bit
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
R
W
Reset
0 0 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MTBDWT_CTRL field descriptions
Field
Description
31–28
NUMCMP
Number of comparators
The MTB_DWT implements two comparators.
DWTCFGCTRL DWT configuration controls
This field is hardwired to 0xF00_0000, disabling all the remaining DWT functionality. The specific fields
and their state are:
MTBDWT_CTRL[27] = NOTRCPKT = 1, trace sample and exception trace is not supported
MTBDWT_CTRL[26] = NOEXTTRIG = 1, external match signals are not supported
MTBDWT_CTRL[25] = NOCYCCNT = 1, cycle counter is not supported
MTBDWT_CTRL[24] = NOPRFCNT = 1, profiling counters are not supported
MTBDWT_CTRL[22] = CYCEBTENA = 0, no POSTCNT underflow packets generated
MTBDWT_CTRL[21] = FOLDEVTENA = 0, no folded instruction counter overflow events
MTBDWT_CTRL[20] = LSUEVTENA = 0, no LSU counter overflow events
MTBDWT_CTRL[19] = SLEEPEVTENA = 0, no sleep counter overflow events
MTBDWT_CTRL[18] = EXCEVTENA = 0, no exception overhead counter events
MTBDWT_CTRL[17] = CPIEVTENA = 0, no CPI counter overflow events
MTBDWT_CTRL[16] = EXCTRCENA = 0, generation of exception trace disabled
MTBDWT_CTRL[12] = PCSAMPLENA = 0, no periodic PC sample packets generated
Table continues on the next page...
Memory map and register definition
KL02 Sub-Family Reference Manual, Rev. 2.1, July 2013
242
Freescale Semiconductor, Inc.
