Quick Start Guide
6
7
Software Tools Installation
Install CodeWarrior
Development Studio
Freescale’s CodeWarrior for MCUs
integrates the development tools
for several architectures, including
the S12Z architecture, into a single
product based on the Eclipse open
development platform. Eclipse offers
an excellent framework for building
software development environments and
is a standard framework used by many
embedded software vendors.
The latest version of CodeWarrior for
MCUs (Eclipse IDE) can be downloaded
from
freescale.com/CodeWarrior
.
Launch the Demo
Program
The DVD contains a CodeWarrior project
to exercise the different modules of the
S12ZVH MCU family, including the ADC,
TIM, LCD, key interrupts, SCI and CAN
modules.
2
1
Jumper Default Configuration
Jumper
Setting
Description
J2
1-2
Potentiometer enabled
J8
1-2
Switch 1 enabled
J10
1-2
Switch 2 enabled
J11
2-3
Switch signals high when pressed (5 V)
J12
1-2
Switch signals pulled down
J14
1-2
Switch 3 enabled
J15
1-2
Switch 4 enabled
J16
1-2
Connect VDDX to its ballast transistor output
J17
1-2
Connect VDDX to VDDA
J18
1-2
Connect VSUP to VBATT
J19
1-2
Connect the SPLIT pin to the CAN bus
J20
1-2
Connect VDDX to VDDM
J22
1-2
Connect VDDX to VDD5V (5 V supply for the rest of the board peripherals)
J24
1-2
Connect the CAN termination resistors to the CAN bus
J26
1-2
Connect VDDX to VLCD
J28
1-2
Connect VDDC to its ballast transistor output
J33
1-2
Power the speaker amplification circuit
J34
1-2
LED PP3 enabled
J35
2-3
Speaker amplitude controlled by SGT pin
J36
1-2
SCI physical transceiver enable
J37
2-3
MCU SCI module connected to SCI transceiver
J38
1-2
MCU SCI module connected to SCI transceiver
J39
1-2
LED PP2 enabled
J41
1-2
Speaker tone control enabled
J42
1-2
LED PP1 enabled
J43
1-2
LIN transceiver enabled
J44
1-2
LED PP0 enabled
TRK-S12ZVH128
Downloaded from
Downloaded from
Downloaded from
Downloaded from
