14
consumption standby mode. Calling or SMS can awake the tracker.
5.30.2 No sleep mode
Send SMS “sleep+pspace+off”, it will reply “sleep off ok”. Tracker won’t sleep and GSM, GPS,
always work.
5. 31 Forward the third parties’ message
5.31.1 Send SMS "pspace+third parties phone number" from authorized phone number,
tracker will reply"forward ok", and supports 1 third parties phone numbers at most.
For example, set the phone number of the service provider of the sim card in the tracker, when charge
remind message coming in, tracker will forward it to authorized phone number.
5.31.2 Cancel: Send SMS command "nopassword".
5.32 Charges Inquiry
Function: Send SMS command “pspace+carrier’s phone space+code" to
tracker, it will forward the code to the carrier’s phone number and return the message from the carrier’s
phone number.
How it works: After receive balance command, pick up the phone number sending this command, the carrier 's
phone number and code in the message, and then send the code to carrier 's phone number, then forward the
message get from carrier’s phone number to the phone number sending this command.
5.33 State Checking
Send SMS:”check+password” to the tracker device, it will reply its current status as: GSM: 100% GPS:
OK/NO GPRS: ON/OFF battery: 100%.
5.34 IMEI checking
Send SMS command "imei+password" to the unit. E.g.: Send SMS command "imei123456" to the unit, an
IMEI number in 15 digits will be replied to your cell phone.
5.35 TCP/UDP Switch
Command: "gprs+password,0,0" TCP with keep alive data, this is the default mode.
Command: "gprs+password,1,0" TCP without keep alive data
Command: "gprs+password,0,1" UDP with keep alive data
Command: "gprs+password,1,1" UDP without keep alive data
