12
Summary Count: 3
Destination: 10::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 10::/68 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 10::/120 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
# Display brief information about the matched route with the longest prefix length.
<Sysname> display ipv6 routing-table 10:: 127 longer-match
Routing Tables:
Summary Count : 1
Destination: 10::/120 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
See
for description of the output.
display ipv6 routing-table
ipv6-address1
ipv6-address2
Syntax
display ipv6 routing-table
ipv6-address1
prefix-length1
ipv6-address2
prefix-length2
[
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-address1
/
ipv6-address2
: An IPv6 address range from IPv6 address1 to IPv6 address2.
prefix-length1
/
prefix-length2
: Prefix length, in the range 0 to 128.
verbose
: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
