10
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter user interface view
user-interface
{
first-num1
[
last-num1
] | {
aux
|
vty
}
first-num2
[
last-num2
] }
—
Set the maximum number of
commands that can be saved in the
history buffer
history-command
max-size
size-value
Optional
By default, the history buffer can
save up to 10 commands.
NOTE:
For more information about the
user-interface
and
history-command
max-size
commands, see
Fundamentals Command Reference.
Controlling the CLI display
Multi-screen display
Controlling multi-screen display
If the output information spans multiple screens, each screen pauses after it is displayed. Perform one of
the following operations to proceed.
Action Function
Press
Space
Displays the next screen.
Press
Enter
Displays the next line.
Press
Ctrl+C
Stops the display and the command execution.
Press
<PageUp>
Displays the previous page.
Press
<PageDown>
Displays the next page.
By default, each screen displays up to 24 lines. To change the maximum number of lines displayed on the
next screen, use the
screen-length
command. For more information about the
screen-length
command,
see
Fundamentals Command Reference
.
Disabling multi-screen display
You can use the following command to disable the multi-screen display function. All the output
information will be displayed at one time and the screen will refresh continuously until the last screen is
displayed.
