4-39
Examples
# Configure the Graceful Restart interval for OSPF process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] graceful-restart interval 100
host-advertise
Syntax
host-advertise
ip-address cost
undo host-advertise ip-address
View
OSPF area view
Default Level
2: System level
Parameters
ip-address
: IP address of a host
cost
: Cost of the route, in the range 1 to 65535.
Description
Use the
host-advertise
command to advertise a host route.
Use the
undo host-advertise
command to remove a host route.
No host route is advertised by default.
Examples
# Advertise route 1.1.1.1 with a cost of 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] host-advertise 1.1.1.1 100
import-route (OSPF view)
Syntax
import-route
protocol
[
process-id | all-processes
|
allow-ibgp
] [
cost
cost
|
type
type
|
tag tag
|
route-policy route-policy-name
] *
undo import-route
protocol
[
process-id | all-processes
]
View
OSPF view
Default Level
2: System level