9-25
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: Displays the topology information of an OSPFv3 process; The process ID ranges from 1 to
65535.
area
: Displays the topology information of the specified area.
area-id
: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4
address format by the system or an IPv4 address.
Description
Use the
display ospfv3 topology
command to display OSPFv3 topology information. If no process is
specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index) Bits Metric Next-Hop Interface
Rtr 1.1.1.1 --
Rtr 2.2.2.2 1 2.2.2.2 Vlan1
Rtr 3.3.3.3 1 3.3.3.3 Vlan1
Rtr 4.4.4.4 1 4.4.4.4 Vlan1
Net 4.4.4.4(983049) 1 0.0.0.0 Vlan1
Table 9-20
display ospfv3 topology
command output description
Field
Description
Type Type
of
node
ID(If-Index) Router
ID
Bits Flag
bit
Metric Cost
value
Next-Hop Next
hop
Interface Outbound
interface
display ospfv3 vlink
Syntax
display ospfv3
[
process-id
]
vlink
