20
Parameters
instance-id
: Specifies an Ethernet service instance ID in the range of 1 to 4096.
Examples
# On the Layer 2 Ethernet interface FortyGigE 1/0/1, create Ethernet service instance
1
and enter
Ethernet service instance view.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] service-instance 1
[Sysname-FortyGigE1/0/1-srv1]
Related commands
display l2vpn service-instance
shutdown
Use
shutdown
to shut down a VSI.
Use
undo shutdown
to restore the default.
Syntax
shutdown
undo shutdown
Default
VSIs are up.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
Use this command to temporarily disable a VSI to provide Layer 2 switching services. The shutdown
action does not change settings on the VSI. You can continue to configure the VSI. After you bring up
the VSI again, the VSI provides services based on the latest settings.
Examples
# Shut down the VSI
vpn1
.
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] shutdown
Related commands
display l2vpn vsi
tunnel
Use
tunnel
to assign VXLAN tunnels to a VXLAN.
Use
undo tunnel
to remove VXLAN tunnels from a VXLAN.
Syntax
tunnel
{
tunnel-number
[
flooding-proxy
] |
all
}
