35
Step Command
Remarks
8.
(Optional.) Configure
filtering of advertised
routes.
filter-policy
acl6-number
export
[
protocol
process-id
]
By default, BGP does not filter
advertised routes.
9.
(Optional.) Configure
filtering of received
routes.
filter-policy
acl6-number
import
By default, BGP does not filter
received routes.
Displaying and maintaining IPv6 MCE
Execute
display
commands in any view.
Task Command
Display information about a
specified VPN instance or all VPN
instances.
display ip vpn-instance
[
instance-name
vpn-instance-name
]
Display BGP peer group
information for a VPN instance.
display bgp group ipv6
[
unicast
]
vpn-instance
vpn-instance-name
[
group-name
group-name
]
Display BGP peer information for a
VPN instance.
display bgp peer ipv6
[
unicast
]
vpn-instance
vpn-instance-name
[
ipv6-address prefix-length
| {
ipv6-address
|
group-name
group-name
}
log-info
| [ [
ipv6-address
]
verbose
] [
standby slot
slot-number
] ]
For commands that display information about a routing table, see
Layer 3—IP Routing Command
Reference
.
For more information about the
display bgp group
and
display bgp peer
commands, see
Layer
3—IP Routing Command Reference
.
IPv6 MCE configuration example
Network requirements
As shown in
, RIPng runs in VPN 2. Configure the MCE device to separate routes from
different VPNs and advertise VPN routes to PE 1 through OSPFv3.
