NJR-TW01UHD/NJR-RW01UHD Command Guide
35
4.5.2.6 Setting LAN
@GIP / @SIP
LAN
Getting
Command
@GIP, device, ch, reserved
Response
@GIP, device, ch, reserved, mode, ip, mask, gateway
Setting
Command
@SIP, device, ch, reserved, mode, ip, mask, gateway
Response
@SIP, device, ch, reserved, mode, ip, mask, gateway
Parameter
device: Model
1 = NJR-TW01UHD (LAN model), 2 = NJR-RW01UHD
ch: Channel
1 to 512 = Channel 1 to Channel 512
reserved: Reservation
“1” fixed
mode: Mode
0 = Automatic (DHCP) [Default], 1 = Static
“0” is selected, the following three parameters will be invalid.
ip: IP address
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
mask: Subnet mask
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
gateway: Default gateway
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
Getting
example
Command
Response
@GIP,1,1,1
@GIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254
Description Getting the LAN setting of NJR-TW01UHD (LAN model) Channel 1
- Mode : Static
- IP address : 192.168.3.2
- Subnet mask : 255.255.255.0
- Default gateway : 192.168.3.254
Setting
example
Command
Response
@SIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254
@SIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254
Description Setting the LAN setting of NJR-TW01UHD (LAN model) Channel 1 as follows:
- Mode : Static
- IP address : 192.168.3.2
- Subnet mask : 255.255.255.0
- Default gateway : 192.168.3.254
Completed
Remarks
This command can be input only via the NJR-CTB command server.
If the LAN setting is changed, the communication may be disabled.
Change the environmental settings based on the NJR-TW01UHD (LAN model)
and NJR-RW01UHD settings.