CR3132
CANwireless
20
Object
Index
Subindex
Data type
Configuration
Server Type
0x3010
0x18
Unsigned 16
30000 (default)
8.3.11 CAN - Mobile device / PC interface P2P WLAN infrastructure mode
In this mode, a wireless connection is established between a CANwireless device and any other
WLAN-enabled device via WLAN. The CANwireless device needs to be configured as follows:
Object
Index
Subindex
Data type
Configuration
WLAN Enable
0x3008
0x02
Unsigned 8
1: switch on
Bluetooth Enable
0x3008
0x03
Unsigned 8
0: switch off
WLAN Operating Mode
0x3000
0x01
Unsigned 8
1: infrastructure
SSID
0x3000
0x02
Visible_string
Enter the SSID of the WLAN network
Authentication Type
0x3000
0x04
Unsigned 8
7: WPA/WPA2 Mixed
Authentication Key
0x3000
0x05
Visible_String
Enter the authentication key of the
WLAN network
DHCP
0x3000
0x09
Unsigned 8
1: client
(only for WLAN infrastructure)
Hostname
0x3005
0x01
Visible_string
Enter a unique device name
Connection Command
1
0x3010
0x01
Unsigned 8
2: connect with static address
Client Enable
0x3010
0x15
Unsigned 8
3: turn on client
Server Type
0x3010
0x16
Unsigned 8
1: socket (TCP/UDP)
Server Type
0x3010
0x18
Unsigned 16
30000 (default)
EEP URL Address/
WLAN Client only 1
0x3010
0x17
Visible_string
Enter the IP address of the WLAN
MiniAP
8.3.12 Sleep mode
The device features a sleep mode to save energy during inactive states.
The following events can trigger the sleep mode:
•
no voltage at terminal 15 within a defined time period
•
no reception of CAN messages within a defined time period
The sleep mode is configured as follows:
Object
Index
Subindex
Data type
Configuration
PMM Shutdown Delay
Time
non-volatile
0x3333
0x32
Unsigned 16
Time in seconds
After terminal 15 is switched off, the
device continues to operate for the
time configured here and then goes
into sleep mode.
Default: 60 s
This function is only active if bit 7 is
set for “PMM Wakeup enable flags”.
PMM Wakeup enable
flags
non-volatile
0x3333
0x37
Unsigned 8
Enable activation of sleep mode via
terminal 15.
Bits 0...6: Reserved → set to 0.
Bit 7: 1 → Monitoring of terminal 15
for sleep mode active
Default: 0
