mobileIoT gateway
CR3145
11
COB ID
Start byte
Length
(bytes)
Type
Object
Position
0x03
0
4
R32
Positioning – speed over ground
4
4
R32
Positioning – GPS odometer
4.6.1 Automatically send GNSS data to the mobileIoT platform
The device can automatically determine the GNSS position and send it to the
mobile
IoT platform.
The configuration is made via the following objects:
Object
Index
Subindex
Type
Default
Description
GNSS-interval
0x4009
0x02
U32
rw
900,000
Interval of the GNSS position logging (in
ms). Set to 0xFFFFFF to deactivate this
function. Min. value = 60,000
GNSS-distance
0x4009
0x03
U32
rw
0xFFFFFFFF Distance between the most recent position
determined and the current position (linear
distance). The minimum distance is 3 me-
tres.
Logging – file up-
load period
0x3333
0x1C
U16
0x01
Period in minutes. When this time has
elapsed, the logged file is closed and trans-
mitted to the server.
Set this value to 0 to deactivate the period.
All data available in the respective device mode are sent via the CAN1 interface.
The exact index and subindex can be found in the corresponding EDS file.
4.7 Energy management
Different energy modes control the energy consumption of the unit. In addition to the standard mode,
the unit also features a sleep mode. In this mode, some functions are deactivated to save energy.
Specific events cause the unit to return to the standard mode.
No mobile radio connection is possible in sleep mode.
Energy management is accessed via the following objects:
Object
Index
Subindex
Type
Default
Description
Power manage-
ment – deep
sleep flag
0x3333
0xF3
U8
wo
—
If this flag is set, the unit can only be woken
up from sleep mode via clamp 30, clamp 15
or CAN1.
The unit will not make up from sleep mode
cyclically or on a vibration event.
Use e.g. during transport
u
Set this flag before changing to sleep
mode.
GB
