Station Color Properties [stcol]
This request sets various Station Indicator Color properties.
URL:
/set.cgi?dst=stcol&<optional-parameters>
Optional Parameters:
•
station=<-1,0..1000>
(optional)
◦ This parameter (if present) chooses which station to operate on.
◦ If this parameter is not preset or
-1
is specified, then this function will operate on the “global”
station settings.
•
button=<-1,0..1000>
(optional)
◦ This parameter (if present) chooses which button to operate on.
◦ If this parameter is not preset or
-1
is specified, then this function will operate on all buttons of
the specified station.
•
<colorName>=<rgbColor>
(optional)
◦ The colorName parameter may be any of
user1
,
user2
,
user3
,
user4
,
on
,
off
,
mixed
,
locked
.
◦ The rgbColor parameter may be a 6-digit or 8-digit hexadecimal color. For example, Red would
be expressed as
FF0000
, and a Dark Blue would be
000033
.
◦ One or more color parameters may be specified in the same URL.
Response:
A single byte is returned. The following table explains the possible return values.
Result Description
0x00
The operation was successful.
0xFF
An internal shared memory error occurred.
Examples:
Interactive Technologies, Inc.
CueServer 2 User's Manual - 18.5.18
Page 338 of 429