CHAPTER 5 |
Nodes & Program Configurations
(continued)
Node Type
Function
PAAS Nodes
Group instructions that activate a message or a series of messages for a Public
Address Announcement System (PAAS).
PAAS nodes can call CMD, DATE, LIST, MSG, PAAS, TABLE and TIME nodes, and the
NOOP andPAUSE commands.
Starting Nodes
Set the first action that
SBX
2
must perform when a call is received at a specific port.
This is a one-step entry. Each
SBX
2
port must be assigned a Starting Node.
The Starting Node indicates the beginning point of an program
configuration.
The same Starting Node can be applied to multiple ports. This is a useful feature when
the same program configuration is run on multiple ports.
VOX Nodes
Provide a menu node that responds to voice prompts instead of DTMF prompts. It
allows rotary callers to use speech to select their option from the menu.
The
SBX
2
listens for audio on the line after each prompt, but does not interpret the
actual word the caller speaks.
VOX nodes can call CMD, DATE, LIST, TIME, VOX, PAAS, TABLE and XFER nodes as
well as the PLAY command.
XFER Nodes
Group settings and commands that allow the
SBX
2
to perform call transfers. XFER
nodes carry out a call transfer based on user generated DTMF signals in a DTMF or
Auto node, or with
a voice signal in a VOX node.
XFER nodes can call CMD, AUTO, DATE, DBN, DTMF, LIST, TIME, VOX,
PAAS,TABLE and XFER nodes as well as the PLAY command
All program configurations using XFER nodes must also include at least one XFER
STYLE node.
Interalia
|
SBX
2
System Manual
Page 46
