2600AS-900-01 Rev. B / September 2008
Return to
3-7
Series 2600A System SourceMeter
Section 3: Test Script Processor Interaction
Figure 3-2
Importing a factory script project from the Series 2600A
Step 2: Modifying the test code for the SourceVMeasureI function
As shown in
, the test code for the script functions is contained in the tab for the
“main.tsp” script file. The test code for all of the functions of the KIGeneral factory script are in this
tab. Use the scroll buttons on the right side of the tab to view more code.
Editing example
The following line of code in the “main.tsp” script file applies to the
SourceVMeasureI
function:
bias = display.prompt("+00.000", " Seconds", "Enter BIAS Voltage.", 0, -40,
40)
A)
Click
File
to display the drop-down file menu
and click
Import
to open the Import wizard.
B)
In the
Import Select
box, click
Existing Project
From Instrument
and then click
Next.
C) Import Open/Close instrument
box With
communications to the Series 2600 open, click
Next.
If communications are not open, use the
drop-down menu to select a resource and
click
Open
D)
In the
Import Project From Instrument
box, click
the
KIGeneral
project, and then cllick
Finish.
KIGeneral
KIGeneral
