Section 8: Keithley User Library Tool (KULT)
Model 4200A-SCS Parameter Analyzer Reference Manual
8-34
4200A-901-01 Rev. C / February 2017
Tutorial 3: Calling one user module from within another
KULT allows a user module to call other user modules. A called user module may be in the same
user library as the calling module or may be in another user library. This section provides a brief
tutorial that illustrates application of such dependencies. It also illustrates the
File > Copy Module
command.
In this tutorial, you create a new user module using two user modules that were created in the
previous tutorials:
Tutorial 1: Creating a new user library and user module
2: Creating a user module that returns data arrays
(on page 8-28):
•
The VSweep user module in the
my_2nd_lib
user library, a copy of which is used as the
dependent user library.
•
The
TwoTonesTwice
user module, in the
my_1st_lib user
library, which is the independent
user library that will be called by the VSweep user module.
A copy of the VSweep user module, called
VSweepBeep
, calls the
TwoTonesTwice
user module to
signal the end of execution.
Creating the VSweepBeep user module by copying an existing user module
Open the Vsweep user module:
1. Start KULT
.
2. Select
File > Open Library
.
3. Select
my_2nd_lib
from the list.
4. Click
OK
.
5. Click
File > Open Module
.
6. Select
VSweep.c
from the list.
7. Click
OK
.
