NetBootLoader
AM4100
Page 5 - 30
ID 36126, Rev. 2.0
P R E L I M I N A R Y
L S
FUNCTION:
Display listing of the current FTP server directory
SYNTAX:
ls
DESCRIPTION:
To display a listing of the current FTP server directory the command
LS is used. This command downloads the listing to the data buffer
and then the listing is displayed. Any previously loaded image in the
data buffer is overwritten. If an attempt is then made to program the
NBL Flash memory after the LS command has been issued it will fail.
M D
FUNCTION:
Display visible memory
SYNTAX:
md [<adr>]
where:
md
command
<adr>
parameter: hexadecimal
<[x … ]x>
starting address of a visible memory area
DESCRIPTION:
To display a visible memory area the command MD is used. The first
time the command MD is issued, visible memory contents starting at
the address 0x0 are displayed if no “<adr>” parameter is used. If
issued again without the “<adr>” parameter, the display starts with
the end address of the previous display. Data is displayed as
hexadecimal 32-bit words and as ASCII dump.
Summary of Contents for AM4100
Page 19: ...AM4100 Introduction ID 36126 Rev 2 0 Page 1 1 Introduction Chapter 1 1 P R E L I M I N A R Y...
Page 57: ...AM4100 Installation ID 36126 Rev 2 0 Page 3 1 Installation Chapter 1 3 P R E L I M I N A R Y...
Page 65: ...AM4100 Configuration ID 36126 Rev 2 0 Page 4 1 Configuration Chapter 1 4 P R E L I M I N A R Y...
Page 89: ...AM4100 NetBootLoader ID 36126 Rev 2 0 Page 5 1 NetBootLoader Chapter 1 5 P R E L I M I N A R Y...
