Himax HM01B0 UPduino Shield
User Guide
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
www.latticesemi.com/legal
.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
4
FPGA-UG-02081-1.0
1.
Introduction
The Himax HM01B0 UPduino Shield is an evaluation and development platform based on the iCE40™ UltraPlus FPGA
(Field-Programmable Gate Array). It consists of two boards – the UPduino v2.0 and the Himax HM01B0 Aapter Board.
The UPduino v2.0 is an efficient, low-cost base platform designed by Gnarly Grey, including the iCE40UP5K FPGA, and
basic power and programming control. The Himax HM01B0 Adapter Board adds a camera with a low-power Himax
image sensor, two microphones, and multiple LEDs for quick visual feedback.
This flexible and powerful platform enables designers to investigate and experiment with key features of the iCE40
UltraPlus FPGA and assists with rapid prototyping and testing of specific designs.
Key features of the Himax HM01B0 UPduino Shield include:
UPduino v2.0
iCE40 FPGA - iCE40UP5K-SG48I (5K LUTs, 39 I/Os, 120 Kbits Embedded Block RAM, 1 PLL and more in a 7 mm x
7 mm 48-pin QFN package.)
USB connection for UART and device programming
On-board Boot Flash
RGB LED
Himax HM01B0 Adapter Board
Camera module with Himax HM01B0 image sensor
Two I
2
S microphones
Six green LEDs
Also included with the kit
3 ft Micro USB cable for programming and power
QuickStart Guide
Figure 1.1. Himax HM01B0 UPduino Shield
1.1.
Further Information
This board features an iCE40UP5K-SG48I FPGA. More information about this FPGA can be found on the Lattice web site
at:
www.latticesemi.com/iCE40UltraPlus
. A complete description of this device can be found in
iCE40 UltraPlus Family
Data Sheet (FPGA-DS-02008)
.
