LucidControl DI4DO4, User Manual (1.0)
2022/02/03
Page 40 of 47
This Bit Parameter configures the output on-phase cancelation.
Parameter
outDi1Flags
Access
Read / Write
Address
0x1901
Bit Parameter
outDi1Flags
Values
Bit Parameter
Bit Postion
outDi1CanCancel
Bit 1
Default Value
Off
Parameter Type
1 Bit
LucidIoCtrl Command Line Tool
Parameter Name
outDi1CanCancel
Parameter Values
on / off
Call (Set)
LucidIoCtrl
–
d[COMx]
–
c[Channel]
–
soutDi1CanCancel=[Value] {-p} {--default}
Call (Get)
LucidIoCtrl
–
d[COMx]
–
c[Channel]
–
goutDi1CanCancel
LucidIoCtrl Command Line Tool Example
Enable output cancelation flag for output channel 4 and make the setting persistent.
LucidIoCtrl
–
dCOM4
–
c4
–
soutDi1CanCancel=on
–
p [ENTER]
Read output configuration cancelation flag of output channel 4
LucidIoCtrl
–
dCOM4
–
c4
–
goutDi1CanCancel [ENTER]
outDi1CanCancel=on
3.4.2.3.3
outDi1CanRetrigger
This Bit Parameter configures the on-phase retrigger function of the output.
See the output modes descriptions in section 3.2.2 for more information.
Parameter
outDi1Flags
Access
Read / Write
Address
0x1901
Bit Parameter
outDi1Flags
Values
Bit Parameter
Bit Postion
outDi1CanRetrigger
Bit 0
Default Value
Off
Parameter Type
1 Bit
LucidIoCtrl Command Line Tool
Parameter Name
outDi1CanRetrigger
Parameter Values
on / off
Call (Set)
LucidIoCtrl
–
d[COMx]
–
c[Channel]
–
soutDi1CanRetrigger=[Value] {-p} {--default}
Call (Get)
LucidIoCtrl
–
d[COMx]
–
c[Channel]
–
goutDi1CanRetrigger
LucidIoCtrl Command Line Tool Example
Enable output retrigger of channel 4 and make the setting persistent.
LucidIoCtrl
–
dCOM4
–
c4
–
soutDi1CanRetrigger=on
–
p [ENTER]
Read output retrigger configuration of output channel 4
LucidIoCtrl
–
dCOM4
–
c4
–
goutDi1CanRetrigger [ENTER]
outDi1CanRetrigger=on
