Action of the master
Reaction of the PR 5410
Set the
Write_Active
bit.
Wait until
Write_Active
has been set.
Write 0 to
Write_Value_Select
.
Reset the
Write_Active
bit.
Set the bit: Action_Select, Write_Active
Single bits can be set or reset directly with
Write_Value_Select
.
For setting, the bit number (80
127) is written to
Write_Value_Select
.
For reset, the bit 128 (208
255) is written to
Write_Value_Select
.
Action of the master
Reaction of the PR 5410
Write register number to
Write_Value_Select
.
Write
Write_Value
to the selected re-
gister.
Write
Write_Value
to the selected re-
gister.
Set the
Write_Active
bit.
Wait until
Write_Active
has been set.
Write 0 to
Write_Value_Select
.
Reset the
Write_Active
bit.
12.2.4.4
Reading bit
Single bits can be read only by reading a register. The procedure is described in
Chapter
12.2.4.5
Control byte
Some device functions can be executed by setting bits in the input area directly.
Action of the master
Reaction of the PR 5410
Set bits in the
Control byte
.
The operation is processed.
Reset bits in the
Control byte
.
Copy
Read_Value_Select
to
Read_Value_Selected
.
12.2.4.6
Waiting for the result of the action
When an action taking a longer time was started, the end of execution can be waited for
after starting (see Chapters
and
).
Action of the master
Reaction of the PR 5410
For setting bits, see Chapters
and
X3 Process Indicator PR 5410
12 Fieldbus interface
Minebea Intec
EN-298
