C
T
U
-M
x
x
NETRONIX CTU-Mxx
NETRONIX .
36
5.13.3.
Pursuing the sector for given application
Command frame:
Header C_GetSectorMad
LSB, MSB
CRC
Wherein:
Parameter name
Parameter description
Value range
C_GetSectorMad
0xAC
Pursuing the sector
0xAC
LSB
LSB of application number
0x00 - 0xFF
MSB
MSB of application number
0x00 - 0xFF
Response frame:
Header C_GetSe1
Sector
OperationCode CRC
Notes:
Before you run C_GetSectorMad command:
switch AutoReader mode off (using C_SetAutoReaderConfig command)
•
load the keys (using 0xff,0xff,0xff,0xff,0xff,0xff)
•
turn antenna supply on (using C_TurnOnAntennaPower command)
•
select the card (using C_Select command)
•
login to sector with number 0, using key of AA type
If response byte is 0x00, it will mean, that given application is not present in MAD
catalogue.
5.13.4.
Pursuing the next sector of application
Command frame:
Header C_GetSectorMadNext LSB, MSB
CRC
Wherein:
Parameter name
Parameter description
Value range
C_GetSectorMad
Pursuing the next sector
0xAE
Response frame:
Header C_GetSector1 Sector
OperationCode CRC
Notes:
Before you run C_GetSectorMadNext command, perform sector searching operation
using C_GetSectorMad, command, of which pursuing result was other than 0.
If response byte is 0x00, it will mean, than no more sectors have been found for given
application.
