9
0x01_Failure)
GetButtonPressTimeReq
0x02
GetButtonPressTimeRsp
0x82
PressTime(1byte)
Other Value present the presstime such as
0x01_1 Second push,
0x02_2 Seconds push,
0x03_3 Seconds push,
0x04_4 Seconds push,
0x05_5 Seconds push,and so on
Other value is reserved
(3)Configure device parameters ButtonPressTime=0x0A
Downlink: 010A
Device returns:
8100 (configuration successful)
8101 (configuration failed)
(4)Read device parameters
Downlink: 02
Device returns:
820A (current device parameters)
5.4 Example for MinTime/MaxTime logic
Example#1
based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime
MaxTime
Sleeping(MinTime)
Sleeping(MinTime)
Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange
value.
Wake up and collects data
REPORTS 3.6V
Wakes up and collects data
REPORTS 3.6V
Wakes up and collects data
REPORTS 3.6V