© 2018 NXP B.V.
MIMXRT1064 EVK
Board Hardware User’s
Guide
1. Introduction
This document is a Hardware User’s Guide for the
MIMXRT1064 Evaluation Kit (EVK) based on the NXP
Semiconductor i.MX RT1064 Processor. This board is
fully supported by NXP Semiconductor. This manual
includes system setup and debugging, and provides
detailed information on the overall design and usage of
the EVK board from a hardware systems perspective.
1.1. Board overview
This EVK board is a platform designed to showcase the
most commonly used features of the i.MX RT1064
Processor in a small, low cost package. The
MIMXRT1064 EVK board is an entry level
development board, which gives the developer the option
of becoming familiar with the processor before investing
a large amount or resources in more specific designs.
NXP Semiconductors
Document Number: MIMXRT1064EVKHUG
User's Guide
Rev. 0 ,
10/2018
Contents
1.
Introduction ........................................................................ 1
1.1.
Board overview ....................................................... 1
1.2.
MIMXRT1064 EVK vontents ................................. 3
1.3.
MIMXRT1064 EVK board revision history ............ 3
2.
Specifications ..................................................................... 3
2.1.
i.MX RT1064 processor .......................................... 5
2.2.
Boot mode configurations ....................................... 6
2.3.
Power tree ................................................................ 6
2.4.
SDRAM memory .................................................... 9
2.5.
SD card slot ............................................................. 9
2.6.
Hyper flash .............................................................. 9
2.7.
QSPI flash ............................................................... 9
2.8.
Ethernet connector ................................................. 10
2.9.
USB PHY connector.............................................. 10
2.10.
Audio input / output connector .............................. 10
2.11.
OpenSDA circuit (DAP-link) ................................ 10
2.12.
JTAG connector .................................................... 10
2.13.
Arduino expansion port ......................................... 11
2.14.
Camera module connector ..................................... 12
2.15.
User interface switch ............................................. 12
2.16.
Power switch ......................................................... 13
2.17.
ON/OFF button...................................................... 13
2.18.
Reset button ........................................................... 13
2.19.
USER button ......................................................... 13
2.20.
Sensor .................................................................... 13
2.21.
User interface LED indicator ................................. 13
2.22.
LCD interface ........................................................ 14
3.
PCB information ............................................................... 14
4.
EVK design files............................................................... 14
5.
Contents of the evaluation kit ........................................... 15
6.
Revision history ................................................................ 15
