AT-UHD-CAT-XX
12
Commands
IPPort
Sets the Telnet listening port for the unit. Use the
sta
argument to display the current setting.
Example
IPPort 23
Syntax
IPPort X
Parameter
Description
Range
X
Port
0 ... 65535, sta
Feedback
IPPort 23
IPQuit
Closes the current Telnet session.
Example
IPQuit
Syntax
IPQuit
Feedback
Connection lost...
This command does not require any parameters
IPStatic
Sets the static IP address, subnet mask, and gateway (router) address of the unit. Before using this command,
DHCP must be disabled on the unit. Refer to the
IPDHCP
command for more information. Each argument must be
entered in dot-decimal notation and separated by a space. The default static IP address is
192.168.1.254
.
Example
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
Syntax
IPStatic X Y Z
Parameter
Description
Range
X
IP address
0 ... 255 (per octet)
Y
Subnet mask
0 ... 255 (per octet)
Z
Gateway (router)
0 ... 255 (per octet)
Feedback
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1