18
3.1.3 Configuration > Servers
In the
Configuration
tab, select the
Servers
menu to define the configuration of the servers peripheral to your device.
The
Datasource Server
is the server machine having the dynamic information of the PPK content to get from the id 1 to 10 so that it can be then
transmitted to the SLATEs paired to the SAP10e device:
Datasource Server
:
URL
: enter the URL² including the
port
of your
Datasource Server
(only the
http
scheme is supported) ,
Credential
checked
:
default type:
Username/Password
,
username
: username to access to the server,
password
: password to access to the server,
unchecked
(default value): no username/password is required,
Heartbeat
: periodicity of the connection to the
Datasource Server
, from
100
seconds (default value) to
900
seconds (15 minutes).
DNS servers
: enter the IPV4 address of your favorite DNS,
NTP time server
.
☛
The NTP time server is the only way for the SAP10e device to be on time. Once the device is on time, the date and time is transmitted to the
SLATEs. When the NTP time server is configured, ensure to have a valid gateway and a valid DNS server.
☛
The
generic_server
application can work even if the NTP time server is not set.
☛
The login credentials inside the URL are not supported, i.e.
http://user1:password1@192.168.10.10:8081/webdir/01320-00550
.
☛
When only the
Heartbeat
value is modified, press on TAB key of your keyboard to make appear the
Validate
button.
²
The URL has to match the directory of your database. If you have more than one SAP10e device to control, it is advised to implement one directory per
SAP10e device with the directory name matching either the device PSN, or the device MAC address, i.e.:
http://192.168.10.10:8081/webdir/01320-00550
with 01320-00550, an example of PSN value from a SAP10e device, or
http://192.168.10.10:8081/webdir/00-1c-e6-02-4c-ad
with 00-1c-e6-02-4c-ad, an
example of MAC address value from a SAP10e device.
To put the same URL for all your SAP10e device datasource inputs, you can use two kind of variable values intrinsic to the device:
Variable type
String to set in the input
Value example
deviceInfo:mac variable
{$deviceInfo:mac}
00-1c-e6-02-4c-ad
³
deviceInfo:psn variable
{$deviceInfo:psn}
01390-00550
³
The format with double dot instead of dash is not supported when using
{$deviceInfo:mac}
variable (i.e.: 00:1c:e6:02:4c:ad).
The URL would be for example:
http://192.168.10.10:8180/webdir/{$deviceInfo:mac}
or,
http://192.168.10.10:8180/webdir/{$deviceInfo:psn}
.
For further information about the device PSN value, refer to the chapter §
. For further information about the device MAC value,
refer to the chapter §
.
◬
Servers available with the
https
scheme are not supported.
◬
Upgrading the SAP10e device with another application type will clear the current datasource configuration data. When the SAP10e device is
properly configured, it is advised to build and save an appropriate SAP10e device configuration script (
.js
) by using the configuration script
configuration file of your SAP10e device. For further information, refer to the chapter §
Summary of Contents for SAP10e
