Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
Other System Configuration CLI Commands
63
On Demand E-mail Home Status
syscli --send statusondemand [--emailaddr <recipient_email_address>]
This CLI command allows the admin user to send the e-mail containing Status
information, on demand.
On Demand E-mail Home Configuration
syscli --send configondemand --emailaddr <recipient_email_address>
This CLI command allows the admin user to send the e-mail containing Status
information, on demand.
SNMP Trap Destination
CLI Commands
The following SNMP trap destination CLI commands are available:
•
Listing SNMP Trap Destinations
•
•
Editing SNMP Trap Destinations
•
Deleting SNMP Trap Destinations
•
Deleting All SNMP Trap Destinations
•
•
•
•
•
•
Listing SNMP Trap Destinations
syscli --list snmptrapdest
This CLI command allows the user to list the configured SNMP trap destinations.
An example output of Trap Destination is shown below.
Total
TrapDestinations
=
2
Trap
Destination
number
=
1
IP
Address
=
10.40.166.87
Name
=
public
Selected
Traps
=
Failure,Warning,Informational,Available,Unavailable
Trap
Destination
number
=
2
IP
Address
=
10.40.167.77
Name
=
public
