Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
Utility CLI Commands
69
[License
=
5]
License
Name
=
Storage
Capacity
Installed
=
Yes
Date
Installed
=
2009
-
06
-
01
15:32:24
License
Description
=
Limit
Storage
Capacity
[License
=
6]
License
Name
=
OST
Installed
=
No
Date
Installed
=
‐‐
Not
Installed
‐‐
License
Description
=
Limit
Open
Storage
Server
Connections
[License
=
7]
License
Name
=
Vision
Installed
=
No
Date
Installed
=
‐‐
Not
Installed
‐‐
License
Description
=
Enables
Advanced
Reporting
Adding a License
syscli --add license --key <license_key>
This CLI command allows the admin user to add a license on the system. The
user needs to provide a key corresponding to the license.
Note:
For DXi4510 and DXi 4520 systems, all available licenses are
pre-installed at the factory. There is no need to add licenses to these
systems.
Note:
After adding a storage capacity license to DXi4601, you must reboot
the DXi to complete the storage capacity upgrade. The new storage
capacity will not be available until you reboot the DXi.
Diagnostic Logs
Generating a Diagnostic Log
syscli --gen diaglog [--system] | [--array] [--quiet] [--lastgen]
This CLI command allows the admin user to generate diagnostic logs on the
system.
CLI command options:
•
--system
: generates the system diagnostic log. This is the default if no
diagnostic type is specified.
•
--array
: generates the raid array diagnostic log
