Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1064
User Manual 1178.8520.02 ─ 01
Setting parameters:
<SourceFile>
String containing the path and file name of the source file.
<NewFileName>
String containing the path and name of the target file.
Example:
MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
Usage:
Setting only
MMEMory:MSIS
<Device>
This command selects the default storage device used by all MMEMory commands.
Parameters:
<Device>
'A:' | 'C:' | … | 'Z:'
String containing the device drive name
*RST:
n.a.
MMEMory:NAME
<FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with
. Note that you have to route the printer output to a file.
Parameters:
<FileName>
String containing the path and name of the target file.
Example:
MMEM:NAME 'C:\R_S\INSTR\USER\PRINT1.BMP'
Selects the file name.
MMEMory:NETWork:DISConnect
<Drive>[, <Force>]
This command disconnects a network drive.
Setting parameters:
<Drive>
String containing the drive name.
<Force>
1 | 0 | ON | OFF
Optional: determines whether disconnection is forced or not
1 | ON
Disconnection is forced.
0 | OFF
Disconnect only if not in use.
*RST:
0
Usage:
Setting only
Managing Settings and Results
