Remote Control Commands
R&S
®
SMA100B
466
User Manual 1178.3834.02 ─ 03
Return values:
<Resource>
string
Example:
See
Example "Finding out the used VISA ressource strings"
Usage:
Query only
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
SYSTem:COMMunicate:NETWork:RESTart
// Terminates the network connection and sets it up again
Usage:
Event
Manual operation:
See
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State>
0 | 1 | OFF | ON
Example:
See
Example "Retrieving information on network-related set-
Usage:
Query only
Manual operation:
See
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain
<Domain>
Determines the primary suffix of the network domain.
Parameters:
<Domain>
string
Example:
See
Example "Retrieving information on network-related set-
Manual operation:
See
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname
<Hostname>
Sets an individual hostname for the Signal Generator.
Note:
We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
This is a password-protected function. Unlock the protection level 1 to access it, see
.
SYSTem Subsystem
