Command reference
R&S
®
ZNB/ZNBT
1409
User Manual 1173.9163.02 ─ 62
For background information, see
Chapter 4.4.3, "Memory-mapped trace data transfer"
Setting parameters:
<ShMemName>
Gives the shared memory buffer a name, which is required by
processes that want to access it.
The name must be unique within the running Windows instance.
The names of the shared memory buffers initialized using
SYSTem:DATA:MEMory:INITalize
can be queried using
Usage:
Setting only
SYSTem:DATA:MEMory:DELete
<ShMemName>
Deletes a shared memory buffer <ShMemName> initialized using
.
, an initialized shared memory buffer has
the temporary name
NewMemory
. Do not delete it.
Setting parameters:
<ShMemName>
Unique name of the shared memory buffer.
Usage:
Setting only
SYSTem:DATA:MEMory:INITalize
Initializes a new shared memory buffer.
●
to add traces to it.
●
Finally, use
to complete the setup and create the
named shared memory buffer in Windows.
For background information, see
Chapter 4.4.3, "Memory-mapped trace data transfer"
Usage:
Event
SYSTem:DATA:MEMory:OFFSet?
Queries the offset in bytes of the last added trace data block, relative to the start of the
shared memory buffer (see
).
The offset is required by processes that want to read the trace data from the buffer.
For background information, see
Chapter 4.4.3, "Memory-mapped trace data transfer"
Usage:
Query only
SCPI command reference
