Chapter 8: Using the Command Line Interface
516
Naming a Rack Unit
This command syntax assigns or changes the name of the specified rack
unit on the specified asset strip.
config:#
rackUnit <n> <rack_unit> name "<name>"
Variables:
<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the PX3 device with only one
FEATURE port, the number is always 1.
<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.
<name> is a string comprising up to 32 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Setting the LED Operation Mode
This command syntax determines whether a specific rack unit on the
specified asset strip follows the global LED color settings.
config:#
rackUnit <n> <rack_unit> LEDOperationMode <mode>
Variables:
<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the PX3 device with only one
FEATURE port, the number is always 1.
<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.
<mode> is one of the LED modes:
automatic or manual.
Mode
Description
automatic
This option makes the LED of the specified rack
unit follow the global LED color settings. See
Setting LED Colors for Connected Tags
(on
page 514) and
Setting LED Colors for
Disconnected Tags
(on page 514).
This is the default.
Summary of Contents for PX3-1000 series
