MIDI Implementation
10
■
●■
Pitch Bend Change
Status
2nd byte
3rd byte
EnH
llH
mmH
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm, ll = Pitch Bend value:
00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* This is transmitted only on the channels which are assigned to the backing part.
* Transmitted only when the device is in play for pattern in which Pitch Bend Change
is recorded.
■
■ ■
System Realtime Messages
■
●■
Timing Clock
Status
F8H
■
●■
Start
Status
FAH
■
●■
Continue
Status
FBH
■
●■
Stop
Status
FCH
■
●■
Active Sensing
Status
FEH
* This message is transmitted at intervals of approximately 250 msec.
■
■ ■
System Exclusive Message
Identity Reply, V-LINK message, and MIDI Visual Control message are the only System
Exclusive messages transmitted by this device.
■
●■
Universal Non-realtime System Exclusive Message
■
❍ ■
Identity Reply
Status
Data byte Status
F0H
7EH, dev, 06H, 02H, 41H, 61H, 02H, 00H,
00H, 00H, 02H, 00H, 00H
F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
dev
Device ID (00H - 1FH (1 - 32), 7FH)
Initial value is 10H (17)
06H
Sub ID#1 (General Information)
02H
Sub ID#2 (Identity Reply)
41H
ID number (Roland)
61H 02H
Device family code
00H 00H
Device family number code
00H 02H 00H 00H
Software revision level
F7H
EOX (End of Exclusive)
* When Identity Request (p. 6) is received, Identity Reply message will be transmitted.
* The [SETUP] - [MIDI] - [GLOBAL] Device ID setting is used as the Device ID.
