Real Time Automation, Inc.
61
1-800-249-1612
Variables
- These are the values for
All Slaves
or the specific slave selected.
1)
Network Bitmap Status (Displayed in Hex):
a)
-Each bit corresponds to a slave. If the bit is set, the slave is connected, otherwise the bit is 0.
b)
-Bit 0 corresponds to Slave 1 and Bit 4 is for Slave 5 and so on.
2)
FC01 Read Coil Status:
a)
-Function Code 1: Number of read Coil Status requests sent
b)
-Point Type Used: 0x Coil Status
c)
-# of Points: Any
3)
FC02 Read Input Status:
a)
-Function Code 2: Number of read Input Status requests sent
b)
-Point Type Used: 1x Input Status
c)
-# of Points: Any
4)
FC03 Read Holding Registers:
a)
-Function Code 3: Number of read Holding Register requests sent
b)
-Point Type Used: 4x Hold Reg
c)
-# of Points: Any
5)
FC04 Read Input Registers:
a)
-Function Code 4: Number of read Input Register requests sent
b)
-Point Type Used: 3x Input Reg
c)
-# of Points: Any
6)
FC05 Force Single Coil:
a)
-Function Code 5: Number of write Coil Status requests sent
b)
-Point Type Used: 0x Coil Status
c)
-# of Points: 1
7)
FC06 Preset Holding Register:
a)
-Function Code 6: Number of write Holding Register requests sent
b)
-Point Type Used: 4x Holding Reg
c)
-# of Points: 1
8)
FC15 Force Multiple Coils:
