Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
Z506 Reference Manual V2.1
12
Software version supporting instructions
Z506 is a complete product with Jetson Nano module as the core. Provide developers with one-stop
terminal equipment to assist developers in application development.
Z506 Feiyun Smart Box supporting software includes:
-
L4T (Linux for Tegra): L4T provides "OS" for your Feiyun Smart Box, including Linux kernel, boot
loader, board support package (BSP) and sample file system. (By default, the pure system has been
installed for the device, Jetpack needs to be installed by itself)
-
Jetpack: Jetpack sdk is the most comprehensive solution for building AI applications. It includes
software libraries and apis, examples, developer tools and documentation for the latest and previous
versions of Jetson products.
1 use
1.1 Smart box power on and start
a) Ensure that the voltage of all external systems is turned off
b) Install necessary external cables. (Such as: the display cable connected to the HDMI display, the
power input cable to power the system, the USB cable connecting the keyboard and mouse ...)
c) Connect the power cord to a power source.
d) Connect to the power supply of Z506, the system will start working after power on.
1.2 Recovery Mode
Jetson NANO core module can work in normal mode and Recovery mode, under which file system
update, kernel update, Boot Loader update, BCT update and other operations can be carried out.
The steps to enter the Recovery mode are as follows:
a)
Turn off the power supply to the system.
b) Use a USB cable to connect the OTG port of the Z506 and the USB port of the Jetson
development host.
c)
Short connect 1 and 9 pins of Button connector and supply power to the system. The power
supply shall be maintained for more than 3 seconds, and then disconnect 1 and 9 pin short
wiring of Button connector.The system enters the Recovery mode, and subsequent operations
can be carried out at this point.
2 L4T
（
Linux for Tegra Abbreviation“L4T”
）
L4T provides "OS" for your Feiyun Smart Box, including Linux kernel, boot loader, board support
package (BSP) and sample file system.
Z506 Smart Box is working on a system burned with the official original version of NVIDIA Linux For
Tegra (L4T). HDMI, Gigabit Ethernet, USB2.0, serial port, GPIO, SD card, I2C bus can all be supported. But
Mini-PCIe, M.2, USB3.0, fan interface, etc. cannot work normally.
For all support of Z506 smart box interface, the supporting driver patch (BSP: Board Support Package)
needs to be loaded. Use the flash method to program the system. SDK Manager to install all other JetPack
components except L4T to make your Feiyun Smart Box up and running quickly.
