Manual: ShowNET - Network Interface
Manual: ShowNET - Network Interface
page 12 / 63
page 13 / 63
i) DMX Modes
switch
1
2
3
4
5
6
7
8
9
10
Binary DMX
channel offset
1
2
4
8
16
32
64
128 256
Switch 10 has to be ON (up)
for DMX mode
There are two DMX / ArtNet configuration modes:
(1) DJ Mode & (2) Professional Mode.
The DJ mode is more basic and comes with some pre-configured automations. It is sui-
table for most users.
The Professional mode comes with some advanced features and requires deeper know-
ledge of DMX / ArtNet to be handled properly.
DJ mode is the standard option. To use the Professional mode, open the admin tool and
navigate to the tab ‚Settings‘.
Change the option.
Click on ‚Store Data‘ to save your changes. Click on ‚OK‘ twice and wait until another win-
dow opens that asks to restart the ILDA interface. To do so, switch the laser system off
and on again.
(1) DJ Mode
To get laser output, DMX channel 1 needs to have a value greater than 0 (recommended
64 to 192 as channel 1 is regulating laser intensity from 0% up to 100%.)
Channel
Mode
Value
Function
1 Intensity
DJ
0
Laser off
1 - 255
Increase intensity (full intensity = 255)
2 Pattern selection
DJ
0
Blackout (000.ild must not exist)
1 - 255
Display patterns from SD card:
1 = 001.ild
2 = 002.ild
... and so on
If no pattern is assigned to a number = blackout
3 Pattern speed
(Framerate)
DJ
0 - 15
Standard speed: 50 fps
16 - 255
Increasing speed from 0 fps to 100 fps
4 Size
DJ
0 - 127
Decreasing size X + Y-axis
128 - 191
Decreasing size X-axis
192 - 255
Decreasing size Y-axis
5 Automatic size
DJ
0 - 63
Full size
64 - 127
Changing size automatically X + Y-axis
(increasing speed)
128 - 191
Changing size automatically X-axis
(increasing speed)
192 - 255
Changing size automatically Y-axis
(increasing speed)
6 Rotate
DJ
0 - 192
Manual rotation
193 - 224
Automatic rotation anti-clockwise
(increasing speed)
225 - 255
Automatic rotation clockwise
(increasing speed)
7 Position X-axis coarse
DJ
0 - 255
0 = center
8 Position X-axis fine
DJ
0 - 255
9 Position Y-axis coarse
DJ
0 - 255
0 = center
10 Position Y-axis fine
DJ
0 - 255
11 Color effects
DJ
0 - 15
Show pattern in original colors
16 - 79
Show pattern in different colors (monochrome)
80 - 143
Re-color effects:
Original colors are replaced by new colors
144 - 255
Automatic change of re-color effects
