Siemens scalance WLC711 Reference Manual Download

Page: 95 / 417

Example

Example code is not currently available.

assign-wlan

Use the

assign-wlan

command to assign a WLAN service to both types of load groups. You can also

use this command to unassign a WLAN service from a load group. The

assign-wlan

command is

accessible from the ap:load-groups:<named-load-group> context of the CLI, for both types of load
groups.

assign-wlan add | delete WLAN name

Parameters

add

delete

Use add to assign a WLAN service to a load group. Use delete to unassign
a WLAN service from a load group.

WLAN name

The name of the WLAN service.

Assign a WLAN service to the load group. Assigning a WLAN service to the load group also assigns the
WLAN service to the load group’s Wireless APs.

Examples

The following example assigns the WLAN service named Lab45-WPA to the client load group named
clientgroup1:

WLC.siemens.com

:ap:load-groups:clientgroup1# assign-wlan add Lab45-WPA

bandpreference

Use this command to enable or disable the band preference feature for all APs in a radio type load
group. The

bandpreference

command is accessible from the ap:load-groups:<named-load-group>

context of the CLI, for the radio type of load group.

bandpreference enable | disable

Parameters

enable

Enable band preference steering.

disable

Disable band preference steering. The default condition is disabled.

Examples

This example enables band preference steering for the radio load group named radiogroup1:

WLC.siemens.com

:ap:load-groups:radiogroup1# bandpreference enable

name

Use the

name

command to change the name of a load group.The

name

command is accessible from

the ap:load-groups:<named-load-group> context of the CLI, for both types of load groups.

ap Commands

assign-wlan

SCALANCE WLC711 CLI Reference Guide

Summary of Contents for scalance WLC711


































































































































































































































































































































































































































Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands

Siemens scalance WLC711, Reference Manual

Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands