AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
224
Proprietary and Confidential - Contents subject to change
4118047
Command reference
Table 11-2: SAR Backoff and Thermal Control Command Details
Command
Description
+KRFMUTE
Enable/disable RAT-specific Tx muting
Enable or disable RF Tx muting a combination of RATs for a specific duration, and enable/
disable unsolicited notifications for this command.
If enabled, unsolicited notifications (
) will be received when:
•
The mute duration is enabled or expired.
•
This command is used to disable RF Tx muting while Tx muting is in progress (that is,
sometime during the mute duration).
Supporting devices:
WP76xx/WP77xx. Not supported by WP8548/WP75xx.
Password required:
No
Usage:
•
Execution:
AT+KRFMUTE=<mode>[,<duration>[,<indication>]]
Response:
OK
Purpose:
Enable or disable Tx muting for the RATs specified by the <mode>.
•
Query:
AT+KRFMUTE?
Response:
+KRFMUTE: <mode>,<duration>,<indication>
OK
Purpose:
Display the current RF Tx mute state.
•
Query list:
AT+KRFMUTE=?
Purpose:
Display valid execution format and parameter values.
Parameters:
<mode> (RF mute mode)
•
0 (Default)—Disable
•
1—Mute GSM only
•
2—Mute UMTS only
•
3—Mute GSM and UMTS
•
4—Mute LTE only
•
5—Mute GSM and LTE
•
6—Mute UMTS and LTE
•
7—Mute GSM, UMTS, and LTE
<duration> (Mute duration in seconds)
•
0.5—120
•
Default: 30.0
<indication> (Enable/disable mute mode unsolicited notifications))
•
0 (Default)—Disable
•
1—Enable
