Thermal Mitigation Commands
Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
225
+KRFMUTE
(notification)
RAT Tx mute mode status change (unsolicited notification)
Notification received when RAT Tx mute mode is enabled, expires, or is disabled while in
progress.
Note: This notification is enabled/disabled using
Supporting devices:
WP76xx/WP77xx. Not supported by WP8548/WP75xx.
Usage:
•
Notification:
+KRFMUTE: <mode>[,<duration>]
Purpose:
Indicates RAT Tx muting has begun (been enabled) or stopped (mute period
expired, or muting disabled).
Parameters:
<mode> (RF mute mode)
•
0 (Default)—Disable
•
1—Mute GSM only
•
2—Mute UMTS only
•
3—Mute GSM and UMTS
•
4—Mute LTE only
•
5—Mute GSM and LTE
•
6—Mute UMTS and LTE
•
7—Mute GSM, UMTS, and LTE
<duration> (Mute duration in seconds)
•
0.5—120
•
This parameter is included when mute is enabled. If mute is disabled/expired, this
parameter does not appear.
Examples:
•
Notification received when RAT Tx mute is set to Enabled:
+KRFMUTE: 1, 30.0
•
Notification received when RAT Tx mute is expired, or is disabled while in progress:
+KRFMUTE: 0
Table 11-2: SAR Backoff and Thermal Control Command Details (Continued)
Command
Description
