3-16
Computer Group Literature Center Web Site
Functional Description
3
NMI Enable Register
The NMI Enable Register (NMIEN) defines the events that can generate
an NMI. Refer to
SMB_ALERT (Bit 0)
❏
Set to a logic 1 to allow the generation of an NMI when the SMB
Alert is active.
❏
Write a logic 0 to this bit to disable an NMI for this event.
TEMP (Bit 1)
❏
Set to a logic 1 to allow the generation of an NMI when TEMP is
active.
❏
Write a logic 0 to this bit to disable an NMI for this event.
ALARM_A (Bit 3) and ALARM_B (Bit 2)
❏
Set to a logic 1 to allow the generation of an NMI when the
ALARM_A or ALARM_B go active.
❏
Write a logic 0 to this bit to disable an NMI for this event.
ENUM (Bit 4)
❏
Set to a logic 1 to allow the generation of an NMI when the ENUM
event occurs.
❏
Write a logic 0 to this bit to disable an NMI for this event.
ENABLE (Bit 7)
❏
Set to a logic 1 to allow the listed events to generate an NMI.
❏
Write a logic 0 to prevent the events from generating an NMI.
Table 3-14. Bit descriptions for the NMIEN register
7 (most
significant
bit)
6
5
4
3
2
1
0 (least
significant
bit)
ENABLE
RES
RES
ENUM
ALARM_A
ALARM_B
TEMP
SMB
Solution Systems Technologies Inc.
720-565-5995 | info@solusys.com | www.solusys.com
Solution Systems Technologies Inc.
720-565-5995 | info@solusys.com | www.solusys.com
