© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·
Page 71 of 102
7.2.29 Command WL_ADDR
<id>WL_ADDR<parameter><CR> WLAN IP-Address
Access:
Reading / writing
Description:
With command „WL_ADDR“ will set the IP adress for WLAN of
the Data logger.
Parameter description:
AAA.BBB.CCC.DDD
AAA
Byte0 (Hi-Byte)
BBB
Byte1
CCC Byte2
DDD Byte3 (Lo-Byte)
Value range:
0…4294967295 (in 4Byte spelling)
Initial value:
0
7.2.30 Command WL_DHCP
<id>WL_DHCP<parameter><CR> Switch the WLAN DHCP on oder off
Access:
Reading / writing
Description:
With command „WL_DHCP“ determines if the IP address for the
WLAN is automatically requested by the DHCP server or the
fixed address is used.
Parameter description:
0
IP-settings of the preset value
1
IP- settings are requested and accepted by the DHCP
server at startup.
Value range:
0, 1
Initial value:
1
7.2.31 Command WL_GW
<id>WL_GW<parameter><CR>
WLAN IP-Gateway
Access:
Reading / writing
Desciption:
With command "WL_GW" will set the gateway for WLAN of the
Data logger.
Parameter description:
AAA.BBB.CCC.DDD
AAA
Byte0 (Hi-Byte)
BBB
Byte1
CCC Byte2
DDD Byte3 (Lo-Byte)
Value range:
0…4294967295 (in 4Byte spelling)
Initial value:
0
