Parameterization and configuration
TR-Electronic GmbH 2010, All Rights Reserved
Printed in the Federal Republic of Germany
Page 176 of 183
TR - ELA - BA - DGB - 0016 - 04
01/20/2017
8.2.10.8 Object 6509h
– Offset value, single-sensor-operation
This object stores the offset value which is calculated when the preset function by
means of Object 6003h
– Preset value, single-sensor-operation is executed. The
resulting zero point shift (offset) corresponds to the difference of the desired preset
value and the position of the physical zero point of the measuring system.
8.2.10.9 Object 650Ah
– Manufacturer offset value
This object is not supported.
8.2.10.10 Object 650Bh
– Serial number
This object indicates the measuring system serial number and is hard-wired to Object
1018h: Identity object, sub-index 4, page 159.
Unsigned32
Serial number
Byte 0
Byte 1
Byte 2
Byte 3
2
7
to 2
0
2
15
to 2
8
2
23
to 2
16
2
31
to 2
24
8.2.10.11 Object 650Ch
– Offset values for multi-sensor devices
This object stores the offset value which is calculated when the preset function by
means of Object 6010h
– Preset values for multi-sensor devices is executed. The
resulting zero point shift (offset) corresponds to the difference of the desired preset
value and the position of the physical zero point of the measuring system.
Index
Sub-Index Comment
Type
Attribute
650Ch
0
largest supported Sub-Index = 3
Unsigned8
ro
1
Offset value channel 1
Integer32
ro
2
Offset value channel 2
Integer32
ro
3
Offset value channel 3
Integer32
ro
