camera tilt
Moves the shot vertically. The amount of tilt available depends on the zoom level. (See
.)
Auto-framing pauses when the camera receives this command.
Synopsis
camera tilt { { up [<speed>] [no_wait] } | {down [<speed>] [no_wait] } | stop | get | { set
<position> } }
Options
up
Moves the shot up at the default speed or the
specified speed.
down
Moves the shot down at the default speed or the
specified speed.
<speed >
Optional: Specifies the tilt speed (integer). Not used
with the
set
option.
no_wait
Optional – allows the command to return the
command prompt and respond to new commands
immediately, while the command is in progress. Not
used with the
set
option.
stop
Stops the tilt movement.
get
Returns the camera's tilt position.
set
Centers the shot as close as possible to the specified
row of pixels on the image sensor; snaps to the
specified position if no speed is given. No error is
generated if the command specifies a pixel row that
exists.
<position>
The pixel row to center the shot on. Range may vary
by model.
Examples
>
camera tilt up
OK
>
Tilts the camera up at the default speed.
>
camera tilt down 4 no-wait
OK
>
Tilts the camera down at a speed of 4. The command prompt is available immediately.
>
camera tilt set -560
OK
>
Attempts to re-center the shot at pixel row -560, which is below center.
49
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
