VVDN_T4240MFCS_User_Manual
Rev. A0-02
27
CONFIDENTIAL
10.
Boot the board and catch u-boot prompt
11.
Command line parameter to be set at u-boot prompt
setenv bootcmd 'setenv bootargs root=/dev/mmcblk0p1 rw rootdelay=5
console=$consoledev,$baudrate;mmcinfo;ext2load mmc 0:1 $loadaddr
/boot/$bootfile;ext2load mmc 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr -
$fdtaddr'
12.
Set environment variables on Server 1 and Server 2.
13.
Run following command to load uImage ,t4240mfcs.dtb and rootfs
# run bootcmd
Start up u-boot from SD card
7.2
T4240MFCS SD BOOT
10 GiB left unmapped
Loading U-boot Image....
U-Boot 2014.01QorIQ-SDK-V1.6+gfe1d4f5 (Feb 18 2015 - 10:38:12)
CPU0: T4240E, Version: 2.0, (0x82480020)
Core: e6500, Version: 2.0, (0x80400120)
Clock Configuration:
CPU0:1866.667 MHz, CPU1:1866.667 MHz, CPU2:1866.667 MHz, CPU3:1866.667
MHz,
CPU4:1866.667 MHz, CPU5:1866.667 MHz, CPU6:1866.667 MHz, CPU7:1866.667
MHz,
CPU8:1866.667 MHz, CPU9:1866.667 MHz, CPU10:1866.667 MHz,
CPU11:1866.667 MHz,
CCB:733.333 MHz,
DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:183.333
MHz
FMAN1: 733.333 MHz
FMAN2: 733.333 MHz
QMAN: 366.667 MHz
PME: 533.333 MHz
L1: D-cache 32 KiB enabled
I-cache 32 KiB enabled
Reset Configuration Word (RCW):
00000000: 1607001c 18101c16 00000000 00000000
00000010: 70703848 4e500200 0c020000 f5000000
00000020: 00000000 ee0000ee 00000000 000307fe
00000030: 00000040 50000008 00000000 00000028
Board: T4240MFCS, SERDES Reference Clocks:
SERDES1=100MHz SERDES2=156.25MHz
SERDES3=(PLL1=125MHz,PLL2=156.2MHz) SERDES4=(PLL1=125,PLL2=100MHz)
I2C: ready
SPI: ready
DRAM: Detected UDIMM D3-66JK118SV-13
Detected UDIMM D3-66JK118SV-13
Detected UDIMM D3-66JK118SV-13
12 GiB (DDR3, 64-bit, CL=13, ECC on)
