8.5 Tlimit Function
8.5.1
Send “
p 50
” (50M is the distance, 1-6000M set), reply “tlimit ok” (note: this
function is for auto-tracking function only. If the later position is 50M away with the position before, it
will send sms or gprs data. If less than 50M, it will not send in order to save SMS or gprs fee
8.5.2
Send”
p 0
” to cancel this function, the tracker will “tlimit ok”.
8.6
GPS-refresh setting
Send SMS “
GpsAutpspace+120
”
，
it will reply “GpsAutoSearch ok”. The tracker
will search gps signal in 120s interval after setting this.
The refreshing time is between 120-600 seconds(120<interval <600)
Longer standby time for longer refreshing time and shorter standby time for shorter refreshing time.
8.7
Reboot remotely
passwored
can be sent to the tracker to make the CPU restart when GPRS is stopped. The
tracker will turn off and restart in 3 minutes after sending this command.
8.8 Geo-fence
Set up a geo-fence around of the tracker and it will send message to the authorized numbers when the
tracker goes out of the area .
Notes:
This function will be invalid if the unit moves outside of the district. You need to re-set it if you
want this function again. But if the tracker is in this district again, it will send alert again.
8.8.1
Send SMS
spspace+longitude,latitude;longitude,latitude
to the unit to
set the restricted district.
Remark :The first longitude & latitude is coordinate of the top left corner of the Geo-fence, while the
second longitude & latitude is the coordinate of the bottom right corner. It will reply stockade ok.
TO:13188888888
stockade123456
114.124845e,22.56718
5n;114.777888e,22.555
666n
From:13188888888
stockade ok
10
