12
RS-232 Commands
RS-232 Commands
COMMAND
DESCRIPTION & PARAMETERS
INPUT COMMANDS
GET IN PORT NUMBER
8
Report the number of inputs supported by the unit.
GET IN TYPE LIST
8
List the video format supported by each Input.
GET IN N1 FORMAT
8
Show Input N1’s video format.
N1
= 1 ~ 2
[Input Port]
Valid response values are:
0
[Not Active]
1
[DVI Mode]
2
[HDMI Mode]
GET IN N1 COLOR SPACE
8
Show Input N1’s current color space.
N1
= 1 ~ 2
[Input Port]
Valid response values are:
0
[Not Active]
1 [RGB]
2
[YUV 4:4:4]
3
[YUV 4:2:2]
4
[YUV 4:2:0]
GET IN N1 COLOR DEPTH
8
Show Input N1’s current color bit depth.
N1
= 1 ~ 2
[Input Port]
Valid response values are:
0
[Not Active]
8 [8-bit]
10 [10-bit]
12 [12-bit]
16 [16-bit]
GET IN N1 TIMING
8
Show Input N1’s current resolution and timing.
N1
= 1 ~ 2
[Input Port]
NOTE:
Only works with a currently displayed Input.
SET IN N1 HDCP MODE N2
8
Set Input N1’s HDCP mode to N2.
N1
= 1 ~ 2
[Input Port]
Available settings for
N2
:
0
[Apple Mode]
1
[Refer to Source]
2
[Refer to Sink]
GET IN N1 HDCP MODE
8
Get Input N1’s current HDCP mode.
N1
= 1 ~ 2
[Input Port]
GET IN N1 HDCP STATUS
8
Get Input N1’s current HDCP status.
N1
= 1 ~ 2
[Input Port]
Valid response values are:
0
[No HDCP]
1
[HDCP 1.4]
2
[HDCP 2.2]
A
NEU
VIDEO