____________________________________________________________________________________________________
Getting Started with AC500-eCo Starter-Kit
- 38 -
1. Open a new project:
OPEN:
First start the AC500 Control Builder
programming software, click
to create
a new project.
Select the CPU type:
Select the program language:
Select the desired CPU (in this example
PM554) in the appearing window. Then
in the appearing window click “OK”.
Keep the settings “PLC_PRG” and
“Program” for the name and the type
for this new POU, select “ST” for the
language of the POU and confirm
with “OK”.
The ST Editor is opened.
