*Specifications are subject to changes without notice.
19
SYSTEM CONTROL COMMANDS
4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher
22
9.1 System Control Commands
Command
Description
Command Example and
Feedback
>SetKeyLock
[Lockparam]
Lock/ unlock front panel buttons.
[Lockparam] = On, Off
On - Locked
Off - Unlock
>SetKeyLock Off
<KeyLock Off
>GetKeyLock
Get the locking status of front panel
buttons.
<KeyLock Off
>FactoryReset
Factory reset.
<FactoryReset
>Help
Get the command list.
<V1.0.0
1.">SetVideo param1 To
param2,..."
……
>SetIP
<XXX.XXX.XXX.XXX>
<YYY.YYY.YYY.YYY>
<ZZZ.ZZZ.ZZZ.ZZZ>
Set IP address.
XXX = 0 ~ 255(IP ADDRESS)
YYY = 0 ~ 255(MASK)
ZZZ = 0 ~ 255(GATE)
>SetIP <192.168.1.10> <> <>
<SetIP <192.168.1.10>
<255.255.255.0>
<192.168.0.1>
>GetIP
Get the IP address.
<IP:192.168.1.10>
>GetStatus
Get the system status.
<V1.0.0
<Video
OUT 01 02
IN 01 02
<Audio
OUT A01 A02 01 02
IN S01 S02 S00 S00
……
>SetPower[param]
Power on/off the switcher.
>SetPower param
param = On, Off
On: power on
Off: power off
>SetPower On
<Power On
>GetPower
Get power status of the switcher.
>GetPower
<Power On
>SetAutoTVPower
Set the outputs of auto-trigger power
on/off CEC command.
>SetAutoTVPower param
param = 1, 2, 3, 4
1: HDBT output
>SetAutoTVPower 1
<AutoTVPower 1
