1
Agilent L4400 Series LXI Instruments
Command Quick Reference
Version 1.0
Syntax Conventions
•
Braces (
{ }
) enclose the parameter choices for a given command string. The braces are not sent with the
command string.
•
A vertical bar (
|
) separates multiple parameter choices for a given command string.
•
Triangle brackets (
< >
) indicate that you must specify a value for the enclosed parameter. The brackets are not sent
with the command string. You must specify a value for the parameter.
•
Some parameters are enclosed in square brackets (
[ ]
). The square brackets indicate that the parameter is optional
and can be omitted. The brackets are not sent with the command string. If you do not specify a value for an optional
parameter, the instrument chooses a default value.
Measurement Commands
MEASure:DIGital? {BYTE|1|WORD|2|LWORd|4}, [<
voltage>,] [{NORMal|INVerted} , ] (@<ch_list>)
MEASure:TOTalize? [{READ|RRESet} , ] (@<
ch_list>)
Temperature Configuration Commands
Thermocouple Configuration
[SENSe:]TEMPerature:RJUNction[:INTernal]? (@<
ch_list>)
Digital I/O and Totalizer Configuration Commands
Digital I/O Configuration
CONFigure:DIGital {BYTE|1|WORD|2|LWORd|4}, [<
voltage>,] [{NORMal|INVerted},] (@<ch_list>)
CONFigure:DIGital:DIRection {INPut|0|OUTPut|1}, (@<
ch_list>)
CONFigure:DIGital:DIRection? (@<
ch_list>)
CONFigure:DIGital:HANDshake SYNChronous, [<
thresh_voltage>, [<level_voltage>, [<polarity>,]]] (@<ch_list>)
CONFigure:DIGital:HANDshake:CTIMe {<
seconds>|MIN|MAX|DEF}, (@<ch_list>)
CONFigure:DIGital:HANDshake:CTIMe? [{MIN|MAX},] (@<
ch_list>)
CONFigure:DIGital:HANDshake:DRIVe {ACTive|OCOLlector}, (@<
ch_list>)
CONFigure:DIGital:HANDshake:DRIVe? (@<
ch_list>)
CONFigure:DIGital:HANDshake:POLarity {NORMal|INVerted}, [{H0|0|H1|1|H2|2|ALL},] (@<
ch_list>)
CONFigure:DIGital:HANDshake:POLarity? {H0|0|H1|1|H2|2}, (@<
ch_list>)
CONFigure:DIGital:HANDshake:RATE {<
frequency>|MIN|MAX|DEF}, (@<ch_list>)
CONFigure:DIGital:HANDshake:RATE? [{MIN|MAX},] (@<
ch_list>)
