31
5 – „servis” mode – after short circuit on IN1 port as
mode 4 + sends SMS "SERVICE" to number
PORTCLOSE
6 – „running” mode – relay closed, when GLWV operates
(voltage, logged in GSM network)
CC – closing time [00-99]s
D – [1] – reserved necessary fill by 1
Remote setting and control by SMS
They are accepted just SMS sends from registered numbers
on the SIM as TEST1 to TEST8. The SMS from other numbers
are accepted but ignored and erased immediately.
CAUTION! When you use SMS for erasing of numbers it
must stay in system at least 1 number as TESTx –
otherwise you cant program remotely – you will have to
use again command INIT (via. Table upper).
SMS are always written by
BIG LETTERS.
SMS body includes words split by spaces. First word express
what will be done:
READ – read (name/phone number or parameter)
CLR – clear (name/phone number)
INIT – initialize
SET – set (relay)
RESET – reset (e.g. ECALL)
START - start of procedure (e.g. TEST)
WRITE – write (store)
CAL – call AT command
Caution! The commands can make
unfunctionally of whole system!
After space follow one or multiwords explanation what
command concern (words are again split by spaces). For
example:
READ PAR – parameters reading
SET REL1 ON – relay closing
